Midwest Thermal Spray

2 months 1 week ago

Spraying a wear resistant grip coating on this roll.

Midwest Thermal Spray

2 months 3 weeks ago

This Aluminum Oxide Ceramic Coating provides thermal insulation for these cooling pipes.

Midwest Thermal Spray

3 months 5 hours ago

Coated these 4 feed screws, now our customer will machine new splines on the ends.

Midwest Thermal Spray

3 months 2 weeks ago

The Tungsten Carbide coating applied to this pump housing and impeller will provide signficant erosion resitance.

Midwest Thermal Spray

3 months 3 weeks ago

Added material to repair two spun bearing areas on this shaft used in a bread mixer.

Midwest Thermal Spray

3 months 3 weeks ago

A look at the HVOF Tungsten Carbide coating applied to these spindles before our customer grinds them to finish.

Midwest Thermal Spray

3 months 4 weeks ago

Aluminum Bronze Arc Spray Coating on the I.D. of these sleeves

Midwest Thermal Spray

4 months 1 week ago

Another part saved from the scrap pile! Added material so that our customer was able to the machine this shaft back to specs.

Midwest Thermal Spray

4 months 1 week ago

Dual Twin Wire Arc Spray guns applying Tin-Based Babbitt.

Midwest Thermal Spray

4 months 2 weeks ago

Arc Sprayed a Copper Coating onto this motor armature housing.

Midwest Thermal Spray

4 months 3 weeks ago

Applied a Chrome Carbide HVOF coating to these thermocouples that are being used in an erosive environment.

Midwest Thermal Spray

5 months 1 week ago

After some grit blasting we were able to clean up 3 of these intake screens. We then applied an anti-fouling coating to inhibit marine organisms

Midwest Thermal Spray

5 months 1 week ago

Arc Spraying an Aluminum roll.

Midwest Thermal Spray

5 months 2 weeks ago

Applied a Carbide coating to the gripping surfaces on these Aluminum details.

Midwest Thermal Spray

5 months 3 weeks ago

Just received another shipment of Thermal Spray Wire! As a Praxair Tafa distributer, we can provide you with everything from Thermal Spray consumables, wires, and

Midwest Thermal Spray

5 months 3 weeks ago

Plasma Spraying a ceramic coating.

Midwest Thermal Spray

6 months 20 hours ago

Arc Spraying Tin Based Babbitt onto Crossheads.

Midwest Thermal Spray

6 months 2 days ago

Applied an Arc Spray coating so that our customer is able to repair this mismachined bearing journal.

Midwest Thermal Spray

6 months 5 days ago

HVOF coating fan blades with Tungsten Carbide.

Midwest Thermal Spray

6 months 1 week ago

Arc Spraying Tin Based Babbitt onto this bearing I.D.

Midwest Thermal Spray

6 months 2 weeks ago

HVOF Tungsten Carbide coatings provide resistance to extreme wear, perfect for the sealing surfaces on this pump shaft.

Midwest Thermal Spray

6 months 3 weeks ago

Arc Spraying an erosion resistant coating.

Midwest Thermal Spray

6 months 3 weeks ago

We Arc Sprayed material onto this flat, locating surface so our customer was able to grind it back to its finish dimension.

Midwest Thermal Spray

6 months 4 weeks ago

Zinc Galvanizing provides a corrosion resistant coating on these steel stakes.

Midwest Thermal Spray

7 months 3 days ago

Applied a Tungsten Carbide Coating to this Aluminim Drum. At ~70Rc this hard and dense coating provides exceptional wear resistance.

Midwest Thermal Spray

7 months 6 days ago

Tired of scrapping parts? This Inside Diameter was 0.030" oversized. We were able to apply enough material so that our customer was able to machine

Midwest Thermal Spray updated their cover photo.

7 months 1 week ago

Midwest Thermal Spray

7 months 1 week ago

The Antifouling Coating applied to these large intake screens will protect them from marine organisms while being used at a water treatment plant.

Midwest Thermal Spray updated their profile picture.

7 months 1 week ago

Midwest Thermal Spray

7 months 2 weeks ago

Hard face coatings like what you see below are used for applications that require severe abrasion resistance. This coating has a micro hardness of ~70Rc

Midwest Thermal Spray updated their cover photo.

7 months 2 weeks ago